bypasses message bundling if set Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max number of bytes to send per receiver until an ack must be received to proceed Max time (in milliseconds) to block. Default is 5000 msec The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P) Computed as max_credits x min_theshold unless explicitly set Does not block a down message if it is a result of handling an up message in thesame thread. Fixes JGRP-928 Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500" Sets the logger level (see javadocs) max number of messages before we bundle max time (ms) before we pass the bundled messages up or down Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Traffic class for sending unicast and multicast datagrams. Default is 8 The multicast address used for sending and receiving packets. Default is 228.8.8.8 The multicast port used for sending and receiving packets. Default is 7600 Multicast toggle. If false multiple unicast datagrams are sent instead of one multicast. Default is true The time-to-live (TTL) for multicast datagram packets. Default is 8 Send buffer size of the multicast datagram socket. Default is 100'000 bytes Receive buffer size of the multicast datagram socket. Default is 500'000 bytes Send buffer size of the unicast datagram socket. Default is 100'000 bytes Receive buffer size of the unicast datagram socket. Default is 64'000 bytes If true, disables IP_MULTICAST_LOOP on the MulticastSocket (for sending and receiving of multicast packets). IP multicast packets send on a host P will therefore not be received by anyone on P. Use with caution. The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport If true, the transport should use all available interfaces to receive multicast messages Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on Max number of elements in the logical address cache before eviction starts Time (in ms) after which entries in the logical address cache marked as removable are removed The port to which the transport binds. Default of 0 binds to any (ephemeral) port The range of valid ports, from bind_port to end_port. 0 only binds to bind_port and fails if taken Messages to self are looped back immediately if true Discard packets with a different version if true. Default is false Thread naming pattern for threads in this channel. Default is cl Switch for enabling thread pool for OOB messages. Default=true Use queue to enqueue incoming OOB messages Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run. Default is Discard Switch for enabling thread pool for regular messages. Default true Use queue to enqueue incoming regular messages. Default is true Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Type of timer to be used. Valid values are "old" (DefaultTimeScheduler, used up to 2.10), "new" (TimeScheduler2) and "wheel". Note that this property might disappear in future releases, if one of the 3 timers is chosen as default timer Max number of elements on a timer queue Timer rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Number of ticks in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Tick duration in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Enable bundling of smaller messages into bigger ones. Default is true Enable bundling of smaller messages into bigger ones for unicast messages. Default is false Switch to enable diagnostic probing. Default is true Address for diagnostic probing. Default is 224.0.75.75 Port for diagnostic probing. Default is 7500 If assigned enable this transport to be a singleton (shared) transport whether or not warnings about messages from different groups are logged The type of bundler used. Has to be "old" (default) or "new" The max number of elements in a bundler if the bundler supports size limitations Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Maximum number of bytes for messages to be queued until they are sent Max number of milliseconds until queued messages are sent Timeout in ms to remove idle threads from the OOB pool Minimum thread pool size for the OOB thread pool Max thread pool size for the OOB thread pool Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Minimum thread pool size for the timer thread pool Max thread pool size for the timer thread pool Timeout in ms to remove idle threads from the timer pool Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Command (script or executable) to ping a host: a return value of 0 means success, anything else is a failure. Default is ping Write the stdout of the command to the log. Default is true Timeout to suspect a node P if neither a heartbeat nor data were received from P. Default is 3000 msec Number of times to send an are-you-alive message Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Description of the local cluster, e.g. "nyc". This is added to every address, so itshould be short. This is a mandatory property and must be set Properties of the bridge cluster (e.g. tcp.xml) Name of the bridge cluster If set to false, don't perform relaying. Used e.g. for backup clusters; unidirectional replication from one cluster to another, but not back. Can be changed at runtime Drops views received from below and instead generates global views and passes them up. A global view consists of the local view and the remote view, ordered by view ID. If true, no protocolwhich requires (local) views can sit on top of RELAY Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) drop all messages (up or down) Number of subsequent unicasts to drop in the down direction Number of subsequent multicasts to drop in the down direction use a GUI or not Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The absolute path of the shared file Interval (in milliseconds) at which the own Address is written. 0 disables it. Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Reaper interval in msec. Default is 0 (no reaping) Max time connection can be idle before being reaped (in ms) Should separate send queues be used for each connection Max number of messages in a send queue Receiver buffer size in bytes Send buffer size in bytes Max time allowed for a socket creation in connection table Max time to block on reading of peer address Should TCP no delay flag be turned on SO_LINGER in msec. Default of -1 disables it The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport If true, the transport should use all available interfaces to receive multicast messages Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on Max number of elements in the logical address cache before eviction starts Time (in ms) after which entries in the logical address cache marked as removable are removed The port to which the transport binds. Default of 0 binds to any (ephemeral) port The range of valid ports, from bind_port to end_port. 0 only binds to bind_port and fails if taken Messages to self are looped back immediately if true Discard packets with a different version if true. Default is false Thread naming pattern for threads in this channel. Default is cl Switch for enabling thread pool for OOB messages. Default=true Use queue to enqueue incoming OOB messages Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run. Default is Discard Switch for enabling thread pool for regular messages. Default true Use queue to enqueue incoming regular messages. Default is true Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Type of timer to be used. Valid values are "old" (DefaultTimeScheduler, used up to 2.10), "new" (TimeScheduler2) and "wheel". Note that this property might disappear in future releases, if one of the 3 timers is chosen as default timer Max number of elements on a timer queue Timer rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Number of ticks in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Tick duration in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Enable bundling of smaller messages into bigger ones. Default is true Enable bundling of smaller messages into bigger ones for unicast messages. Default is false Switch to enable diagnostic probing. Default is true Address for diagnostic probing. Default is 224.0.75.75 Port for diagnostic probing. Default is 7500 If assigned enable this transport to be a singleton (shared) transport whether or not warnings about messages from different groups are logged The type of bundler used. Has to be "old" (default) or "new" The max number of elements in a bundler if the bundler supports size limitations Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Maximum number of bytes for messages to be queued until they are sent Max number of milliseconds until queued messages are sent Timeout in ms to remove idle threads from the OOB pool Minimum thread pool size for the OOB thread pool Max thread pool size for the OOB thread pool Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Minimum thread pool size for the timer thread pool Max thread pool size for the timer thread pool Timeout in ms to remove idle threads from the timer pool Sets the logger level (see javadocs) Max number of bytes to send per receiver until an ack must be received to proceed. Default is 500000 bytes Max time (in milliseconds) to block. Default is 5000 msec The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've received 250'000 bytes from P Computed as max_credits x min_theshold unless explicitly set Does not block a down message if it is a result of handling an up message in thesame thread. Fixes JGRP-928 Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500" Sets the logger level (see javadocs) The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport If true, the transport should use all available interfaces to receive multicast messages Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on Max number of elements in the logical address cache before eviction starts Time (in ms) after which entries in the logical address cache marked as removable are removed The port to which the transport binds. Default of 0 binds to any (ephemeral) port The range of valid ports, from bind_port to end_port. 0 only binds to bind_port and fails if taken Messages to self are looped back immediately if true Discard packets with a different version if true. Default is false Thread naming pattern for threads in this channel. Default is cl Switch for enabling thread pool for OOB messages. Default=true Use queue to enqueue incoming OOB messages Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run. Default is Discard Switch for enabling thread pool for regular messages. Default true Use queue to enqueue incoming regular messages. Default is true Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Type of timer to be used. Valid values are "old" (DefaultTimeScheduler, used up to 2.10), "new" (TimeScheduler2) and "wheel". Note that this property might disappear in future releases, if one of the 3 timers is chosen as default timer Max number of elements on a timer queue Timer rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Number of ticks in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Tick duration in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Enable bundling of smaller messages into bigger ones. Default is true Enable bundling of smaller messages into bigger ones for unicast messages. Default is false Switch to enable diagnostic probing. Default is true Address for diagnostic probing. Default is 224.0.75.75 Port for diagnostic probing. Default is 7500 If assigned enable this transport to be a singleton (shared) transport whether or not warnings about messages from different groups are logged The type of bundler used. Has to be "old" (default) or "new" The max number of elements in a bundler if the bundler supports size limitations Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Maximum number of bytes for messages to be queued until they are sent Max number of milliseconds until queued messages are sent Timeout in ms to remove idle threads from the OOB pool Minimum thread pool size for the OOB thread pool Max thread pool size for the OOB thread pool Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Minimum thread pool size for the timer thread pool Max thread pool size for the timer thread pool Timeout in ms to remove idle threads from the timer pool Sets the logger level (see javadocs) Minimum time in msbetween runs to discover other clusters Maximum time in ms between runs to discover other clusters Number of inconsistent views with only 1 coord after a MERGE event is sent up When receiving a multicast message, checks if the sender is member of the cluster. If not, initiates a merge. Generates a lot of traffic for large clusters when there is a lot of merging The delay (in milliseconds) after which a merge fast execution is started Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The access key to AWS (S3) The secret access key to AWS (S3) When non-null, we set location to prefix-UUID When non-null, we use this pre-signed URL for PUTs When non-null, we use this pre-signed URL for DELETEs The absolute path of the shared file Interval (in milliseconds) at which the own Address is written. 0 disables it. Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Number of additional ports to be probed for membership. A port_range of 0 does not probe additional ports. Example: initial_hosts=A[7800] port_range=0 probes A:7800, port_range=1 probes A:7800 and A:7801 Comma delimited list of hosts to be contacted for initial membership max number of hosts to keep beyond the ones in initial_hosts Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Thread naming pattern for threads in this channel. Default is cl Time in milliseconds after which an expired scope will get removed. An expired scope is one to which no messages have been added in max_expiration_time milliseconds. 0 never expires scopes Interval in milliseconds at which the expiry task tries to remove expired scopes Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Sets the logger level (see javadocs) Number of backups to the coordinator. Server locks get replicated to these nodes as well bypasses message bundling if set Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max time barrier can be closed. Default is 60000 ms Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Bypasses message bundling if true Request timeouts (in ms). If the timeout elapses, a Timeout (runtime) exception will be thrown Number of milliseconds to wait for reconciliation responses from all current members Number of backup coordinators. Modifications are asynchronously sent to all backup coordinators Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max number of bytes to be sent in time_period ms. Blocks the sender if exceeded until a new time period has started Number of milliseconds during which max_bytes bytes can be sent Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Port on which the interpreter should listen for requests. 0 is an ephemeral port Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Number of backups to the coordinator. Queue State gets replicated to these nodes as well bypasses message bundling if set Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Number of copies of each incoming message (0=no copies) Number of copies of each outgoing message (0=no copies) Whether or not to copy unicast messages Whether or not to copy multicast messages Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The number of miliseconds to sleep before after an error occurs before sending the next message true to prioritize outgoing messages true to prioritize incoming messages Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max number of bytes to send per receiver until an ack must be received to proceed Max time (in milliseconds) to block. Default is 5000 msec The threshold (as a percentage of max_credits) at which a receiver sends more credits to a sender. Example: if max_credits is 1'000'000, and min_threshold 0.25, then we send ca. 250'000 credits to P once we've got only 250'000 credits left for P (we've received 750'000 bytes from P) Computed as max_credits x min_theshold unless explicitly set Does not block a down message if it is a result of handling an up message in thesame thread. Fixes JGRP-928 Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Max times to block for the listed messages sizes (Message.getLength()). Example: "1000:10,5000:30,10000:500" Sets the logger level (see javadocs) The JDBC connection URL The JDBC connection username The JDBC connection password The JDBC connection driver name If not empty, this SQL statement will be performed at startup.Customize it to create the needed table on those databases which permit table creation attempt without loosing data, such as PostgreSQL and MySQL (using IF NOT EXISTS). To allow for creation attempts, errors performing this statement will be loggedbut not considered fatal. To avoid any DDL operation, set this to an empty string. SQL used to insert a new row. Customizable, but keep the order of parameters and pick compatible types: 1)Own Address, as String 2)Cluster name, as String 3)Serialized PingData as byte[] SQL used to delete a row. Customizable, but keep the order of parameters and pick compatible types: 1)Own Address, as String 2)Cluster name, as String SQL used to fetch all node's PingData. Customizable, but keep the order of parameters and pick compatible types: only one parameter needed, String compatible, representing the Cluster name. Must return a byte[], the Serialized PingData as it was stored by the insert_single_sql statement To use a DataSource registered in JNDI, specify the JNDI name here. This is an alternative to all connection_* configuration options: if this property is not empty, then all connection relatedproperties must be empty. The absolute path of the shared file Interval (in milliseconds) at which the own Address is written. 0 disables it. Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Interval in which a HEARTBEAT is sent to the cluster Timeout after which a node P is suspected if neither a heartbeat nor data were received from P Treat messages received from members as heartbeats. Note that this means we're updating a value in a hashmap every time a message is passing up the stack through FD_ALL, which is costly. Default is false Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Bind address for multicast socket. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK The interface (NIC) which should be used by this transport Time to live for discovery packets. Default is 8 Multicast address to be used for discovery Multicast port for discovery packets. Default is 7555 If true, the transport should use all available interfaces to receive multicast messages. Default is false List of interfaces to receive multicasts on Whether send messages are sent on all interfaces. Default is false List of interfaces to send multicasts on Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The bind address which should be used by the server socket. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK If set, then endpoint will be set to this address Port on which the STOMP protocol listens for requests If set to false, then a destination of /a/b match /a/b/c, a/b/d, a/b/c/d etc If true, information such as a list of endpoints, or views, will be sent to all clients (via the INFO command). This allows for example intelligent clients to connect to a different server should a connection be closed. Forward received messages which don't have a StompHeader to clients Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The NIC on which the ServerSocket should listen on. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK The interface (NIC) which should be used by this transport Timeout to suspect a node P if neither a heartbeat nor data were received from P. Default is 3000 msec Number of times to send an are-you-alive message Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Loop back multicast messages The number of messages in the forward queue. This queue is used to host messages that need to be forwarded by us on behalf of our neighbor The number of messages in the send queue. This queue is used to host messages that need to be sent Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Target address for broadcasts. This should be restricted to the local subnet, e.g. 192.168.1.255 Port for discovery packets Sends discovery packets to ports 8555 to (8555+port_range) Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Reaper interval in msec. Default is 0 (no reaping) Max time connection can be idle before being reaped (in ms) Should separate send queues be used for each connection Max number of messages in a send queue Receiver buffer size in bytes Send buffer size in bytes Max time allowed for a socket creation in connection table Max time to block on reading of peer address Should TCP no delay flag be turned on SO_LINGER in msec. Default of -1 disables it The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport If true, the transport should use all available interfaces to receive multicast messages Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on Max number of elements in the logical address cache before eviction starts Time (in ms) after which entries in the logical address cache marked as removable are removed The port to which the transport binds. Default of 0 binds to any (ephemeral) port The range of valid ports, from bind_port to end_port. 0 only binds to bind_port and fails if taken Messages to self are looped back immediately if true Discard packets with a different version if true. Default is false Thread naming pattern for threads in this channel. Default is cl Switch for enabling thread pool for OOB messages. Default=true Use queue to enqueue incoming OOB messages Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run. Default is Discard Switch for enabling thread pool for regular messages. Default true Use queue to enqueue incoming regular messages. Default is true Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Type of timer to be used. Valid values are "old" (DefaultTimeScheduler, used up to 2.10), "new" (TimeScheduler2) and "wheel". Note that this property might disappear in future releases, if one of the 3 timers is chosen as default timer Max number of elements on a timer queue Timer rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Number of ticks in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Tick duration in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Enable bundling of smaller messages into bigger ones. Default is true Enable bundling of smaller messages into bigger ones for unicast messages. Default is false Switch to enable diagnostic probing. Default is true Address for diagnostic probing. Default is 224.0.75.75 Port for diagnostic probing. Default is 7500 If assigned enable this transport to be a singleton (shared) transport whether or not warnings about messages from different groups are logged The type of bundler used. Has to be "old" (default) or "new" The max number of elements in a bundler if the bundler supports size limitations Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Maximum number of bytes for messages to be queued until they are sent Max number of milliseconds until queued messages are sent Timeout in ms to remove idle threads from the OOB pool Minimum thread pool size for the OOB thread pool Max thread pool size for the OOB thread pool Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Minimum thread pool size for the timer thread pool Max thread pool size for the timer thread pool Timeout in ms to remove idle threads from the timer pool Sets the logger level (see javadocs) Number of millisecs to wait for a response from a suspected member Number of verify heartbeats sent to a suspected member Use InetAddress.isReachable() to verify suspected member instead of regular messages Interface for ICMP pings. Used if use_icmp is true The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK The interface (NIC) which should be used by this transport Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The max number of bytes in a message. Larger messages will be fragmented. Default is 8192 bytes Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Compression level 0-9 (0=no compression, 9=best compression). Default is 9 Minimal payload size of a message (in bytes) for compression to kick in. Default is 500 bytes Number of inflaters/deflaters for concurrent processing. Default is 2 Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max time for socket creation. Default is 1000 msec Max time in milliseconds to block on a read. 0 blocks forever Interval (ms) by which a disconnected stub attempts to reconnect to the GossipRouter Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Comma delimited list of hosts to be contacted for initial membership Sets the logger level (see javadocs) Timeout to wait for the initial members. Default is 3000 msec Minimum number of initial members to get a response from. Default is 2 Minimum number of server responses (PingData.isServer()=true). If this value is greater than 0, we'll ignore num_initial_members Return from the discovery phase as soon as we have 1 coordinator response If greater than 0, we'll wait a random number of milliseconds in range [0..stagger_timeout] before sending a discovery response. This prevents traffic spikes in large clusters when everyone sends their discovery response at the same time Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Cryptographic Service Provider. Default is Bouncy Castle Provider Cryptographic Service Provider. Default is Bouncy Castle Provider Cipher engine transformation for asymmetric algorithm. Default is RSA Cipher engine transformation for symmetric algorithm. Default is AES Initial public/private key length. Default is 512 Initial key length for matching symmetric algorithm. Default is 128 File on classpath that contains keystore repository Password used to check the integrity/unlock the keystore. Change the default Password for recovering the key. Change the default Alias used for recovering the key. Change the default Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The first value (in milliseconds) to use in the exponential backoff. Enabled if greater than 0 Max number of messages to be removed from a NakReceiverWindow. This property might get removed anytime, so don't use it ! Max number of bytes before a stability message is sent to the sender Max number of milliseconds before a stability message is sent to the sender(s) Max number of STABLE messages sent for the same highest_received seqno. A value < 1 is invalid Number of rows of the matrix in the retransmission table (only for experts) Number of elements of a row of the matrix in the retransmission table (only for experts). The capacity of the matrix is xmit_table_num_rows * xmit_table_msgs_per_row Resize factor of the matrix in the retransmission table (only for experts) Number of milliseconds after which the matrix in the retransmission table is compacted (only for experts) If enabled, the removal of a message from the retransmission table causes an automatic purge (only for experts) Whether to use the old retransmitter which retransmits individual messages or the new one which uses ranges of retransmitted messages. Default is true. Note that this property will be removed in 3.0; it is only used to switch back to the old (and proven) retransmitter mechanism if issues occur Time (in milliseconds) after which an idle incoming or outgoing connection is closed. The connection will get re-established when used again. 0 disables connection reaping Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack list of timeouts Max number of milliseconds we try to retransmit a message to any given member. After that, the connection is removed. Any new connection to that member will start with seqno #1 again. 0 disables this Sets the logger level (see javadocs) Timeout to suspect a node P if neither a heartbeat nor data were received from P. Default is 3000 msec Number of times to send an are-you-alive message Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The max number of bytes in a message. Larger messages will be fragmented Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) The NIC on which the ServerSocket should listen on. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport Timeout for getting socket cache from coordinator. Default is 1000 msec Interval for broadcasting suspect messages. Default is 5000 msec Number of attempts coordinator is solicited for socket cache until we give up. Default is 3 Start port for server socket. Default value of 0 picks a random port Start port for client socket. Default value of 0 picks a random port Number of ports to probe for start_port and client_bind_port Whether to use KEEP_ALIVE on the ping socket or not. Default is true Max time in millis to wait for ping Socket.connect() to return Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max number of messages to be removed from the AckReceiverWindow. This property might get removed anytime, so don't use it ! Time (in milliseconds) after which an idle incoming or outgoing connection is closed. The connection will get re-established when used again. 0 disables connection reaping Size (in bytes) of a Segment in the segments table. Only for experts, do not use ! Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Max number of milliseconds we try to retransmit a message to any given member. After that, the connection is removed. Any new connection to that member will start with seqno #1 again. 0 disables this Sets the logger level (see javadocs) Interval in msec to attempt connecting back to router in case of torn connection. Default is 5000 msec Should TCP no delay flag be turned on The bind address which should be used by this transport. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport If true, the transport should use all available interfaces to receive multicast messages Comma delimited list of interfaces (IP addresses or interface names) to receive multicasts on Max number of elements in the logical address cache before eviction starts Time (in ms) after which entries in the logical address cache marked as removable are removed The port to which the transport binds. Default of 0 binds to any (ephemeral) port The range of valid ports, from bind_port to end_port. 0 only binds to bind_port and fails if taken Messages to self are looped back immediately if true Discard packets with a different version if true. Default is false Thread naming pattern for threads in this channel. Default is cl Switch for enabling thread pool for OOB messages. Default=true Use queue to enqueue incoming OOB messages Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run. Default is Discard Switch for enabling thread pool for regular messages. Default true Use queue to enqueue incoming regular messages. Default is true Maximum queue size for incoming OOB messages. Default is 500 Thread rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Type of timer to be used. Valid values are "old" (DefaultTimeScheduler, used up to 2.10), "new" (TimeScheduler2) and "wheel". Note that this property might disappear in future releases, if one of the 3 timers is chosen as default timer Max number of elements on a timer queue Timer rejection policy. Possible values are Abort, Discard, DiscardOldest and Run Number of ticks in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Tick duration in the HashedTimingWheel timer. Only applicable if timer_type is "wheel" Enable bundling of smaller messages into bigger ones. Default is true Enable bundling of smaller messages into bigger ones for unicast messages. Default is false Switch to enable diagnostic probing. Default is true Address for diagnostic probing. Default is 224.0.75.75 Port for diagnostic probing. Default is 7500 If assigned enable this transport to be a singleton (shared) transport whether or not warnings about messages from different groups are logged The type of bundler used. Has to be "old" (default) or "new" The max number of elements in a bundler if the bundler supports size limitations Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack A comma-separated list of GossipRouter hosts, e.g. HostA[12001],HostB[12001] Maximum number of bytes for messages to be queued until they are sent Max number of milliseconds until queued messages are sent Timeout in ms to remove idle threads from the OOB pool Minimum thread pool size for the OOB thread pool Max thread pool size for the OOB thread pool Minimum thread pool size for the regular thread pool Maximum thread pool size for the regular thread pool Timeout in milliseconds to remove idle thread from regular pool Minimum thread pool size for the timer thread pool Max thread pool size for the timer thread pool Timeout in ms to remove idle threads from the timer pool Sets the logger level (see javadocs) The interface (NIC) used to accept state requests. The following special values are also recognized: GLOBAL, SITE_LOCAL, LINK_LOCAL and NON_LOOPBACK Use "external_addr" if you have hosts on different networks, behind firewalls. On each firewall, set up a port forwarding rule (sometimes called "virtual server") to the local IP (e.g. 192.168.1.100) of the host then on each host, set "external_addr" TCP transport parameter to the external (public IP) address of the firewall. The interface (NIC) which should be used by this transport The port listening for state requests. Default value of 0 binds to any (ephemeral) port Size (in bytes) of the state transfer buffer Maximum number of pool threads serving state requests Keep alive for pool threads serving state requests Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Timeout before requesting retransmissions Max number of messages to be removed from a NakReceiverWindow. This property might get removed anytime, so don't use it ! Retransmit retransmit responses (messages) using multicast rather than unicast Use a multicast to request retransmission of missing messages Number of milliseconds to delay the sending of an XMIT request. We pick a random number in the range [1 .. xmit_req_stagger_timeout] and add this to the scheduling time of an XMIT request. When use_mcast_xmit is enabled, if a number of members drop messages from the same member, then chances are that, if staggering is enabled, somebody else already sent the XMIT request (via mcast) and we can cancel the XMIT request once we receive the missing messages. For unicast XMIT responses (use_mcast_xmit=false), we still have an advantage by not overwhelming the receiver with XMIT requests, all at the same time. 0 disabless staggering. Ask a random member for retransmission of a missing message. Default is false The first value (in milliseconds) to use in the exponential backoff. Enabled if greater than 0 Whether to use the old retransmitter which retransmits individual messages or the new one which uses ranges of retransmitted messages. Default is true. Note that this property will be removed in 3.0; it is only used to switch back to the old (and proven) retransmitter mechanism if issues occur Should messages delivered to application be discarded Timeout to rebroadcast messages. Default is 2000 msec Should stability history be printed if we fail in retransmission. Default is false discards warnings about promiscuous traffic If true, trashes warnings about retransmission messages not found in the xmit_table (used for testing) Number of rows of the matrix in the retransmission table (only for experts) Number of elements of a row of the matrix in the retransmission table (only for experts). The capacity of the matrix is xmit_table_num_rows * xmit_table_msgs_per_row Resize factor of the matrix in the retransmission table (only for experts) Number of milliseconds after which the matrix in the retransmission table is compacted (only for experts) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Size (in bytes) of the state transfer buffer Maximum number of pool threads serving state requests Keep alive for pool threads serving state requests Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Max time to keep channel blocked in flush. Default is 8000 msec Timeout (per atttempt) to quiet the cluster during the first flush phase. Default is 2000 msec Timeout to wait for UNBLOCK after STOP_FLUSH is issued. Default is 2000 msec Retry timeout after an unsuccessful attempt to quiet the cluster (first flush phase). Default is 3000 msec Reconciliation phase toggle. Default is true Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Join timeout Leave timeout Timeout (in ms) to complete merge Print local address of this member after connect. Default is true Print physical address(es) on startup Temporary switch. Default is true and should not be changed View bundling toggle Max view bundling timeout if view bundling is turned on. Default is 50 msec Max number of old members to keep in history. Default is 50 Number of views to store in history Time in ms to wait for all VIEW acks (0 == wait forever. Default is 2000 msec Timeout to resume ViewHandler Use flush for view changes. Default is true Logs failures for collecting all view acks if true Logs warnings for reception of views less than the current, and for views which don't include self Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs) Average time to send a STABLE message. Default is 20000 msec Delay before stability message is sent. Default is 6000 msec Maximum number of bytes received in all messages before sending a STABLE message is triggered .If ergonomics is enabled, this value is computed as max(MAX_HEAP * cap, N * max_bytes) where N = number of members Max percentage of the max heap (-Xmx) to be used for max_bytes. Only used if ergonomics is enabled. 0 disables setting max_bytes dynamically. Determines whether to collect statistics (and expose them via JMX). Default is true Enables ergonomics: dynamically find the best values for properties at runtime Give the protocol a different name if needed so we can have multiple instances of it in the same stack (also change ID) Give the protocol a different ID if needed so we can have multiple instances of it in the same stack Sets the logger level (see javadocs)