Uses of Package
org.jgroups

Packages that use org.jgroups

Package	Description
org.jgroups	Provides top-level public JGroups classes such as Channel, Message, etc.
org.jgroups.admin
org.jgroups.auth
org.jgroups.blocks	Provides building blocks that are layered on top of channels.
org.jgroups.blocks.atomic
org.jgroups.blocks.cs
org.jgroups.conf	Provides ways to configure a protocol stack.
org.jgroups.demos	Provides demonstrations of JGroups functionality.
org.jgroups.fork
org.jgroups.jmx
org.jgroups.protocols	Provides implementations of transport protocols which are responsible for sending and receiving messages to/from the network.
org.jgroups.protocols.dns
org.jgroups.protocols.pbcast
org.jgroups.protocols.relay
org.jgroups.protocols.relay.config
org.jgroups.stack	Support for managing protocol stacks.
org.jgroups.util	Provides useful functionality which cannot be assigned to any particular other package.

Classes in org.jgroups used by org.jgroups

Class	Description
Address	Address identifies cluster member.
BaseMessage	A common superclass for all Message implementations.
BatchMessage	A message that contains a batch of messages.
BytesMessage	A Message containing a byte array as payload.
ChannelListener	Allows a listener to be notified when an important channel lifecycle event occurs.
CompositeMessage	A message composed of multiple messages.
Constructable	Interface returning a supplier which can be called to create an instance
EmptyMessage	A Message without a payload; optimized for sending only headers (e.g.
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
JChannel.State
LongMessage	Message with a long as payload.
Membership	Represents a membership of a cluster group.
MergeView	A view that is sent as a result of a cluster merge.
Message	A Message is used to send data to members of a group.
Message.Flag
Message.TransientFlag
NioMessage	A Message with a (heap-based or direct) ByteBuffer as payload. Note that the payload of an NioMessage must not be modified after sending it (ie.
ObjectMessage	A Message with an object as payload.
Receiver	Defines the callbacks that are invoked when messages, views etc are received
UpHandler	Provides a hook to hijack all events received by a certain channel which has installed this UpHandler.
View	A view is a local representation of the current membership of a group.
ViewId	ViewIds are used for ordering views (each view has a ViewId and a list of members).

Classes in org.jgroups used by org.jgroups.admin

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.
View	A view is a local representation of the current membership of a group.

Classes in org.jgroups used by org.jgroups.auth

Class	Description
Message	A Message is used to send data to members of a group.

Classes in org.jgroups used by org.jgroups.blocks

Class	Description
Address	Address identifies cluster member.
ChannelListener	Allows a listener to be notified when an important channel lifecycle event occurs.
Constructable	Interface returning a supplier which can be called to create an instance
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.
Message.Flag
Message.TransientFlag
Receiver	Defines the callbacks that are invoked when messages, views etc are received
UpHandler	Provides a hook to hijack all events received by a certain channel which has installed this UpHandler.
View	A view is a local representation of the current membership of a group.

Classes in org.jgroups used by org.jgroups.blocks.atomic

Class	Description
JChannel	A channel represents a group communication endpoint (like a socket).

Classes in org.jgroups used by org.jgroups.blocks.cs

Class	Description
Address	Address identifies cluster member.
PhysicalAddress	Represents a physical (as opposed to logical) address

Classes in org.jgroups used by org.jgroups.conf

Class	Description
Header	Header is a JGroups internal base class for all JGroups headers.

Classes in org.jgroups used by org.jgroups.demos

Class	Description
Address	Address identifies cluster member.
ChannelListener	Allows a listener to be notified when an important channel lifecycle event occurs.
JChannel	A channel represents a group communication endpoint (like a socket).
Message	A Message is used to send data to members of a group.
Receiver	Defines the callbacks that are invoked when messages, views etc are received
View	A view is a local representation of the current membership of a group.

Classes in org.jgroups used by org.jgroups.fork

Class	Description
Address	Address identifies cluster member.
ChannelListener	Allows a listener to be notified when an important channel lifecycle event occurs.
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.

Classes in org.jgroups used by org.jgroups.jmx

Class	Description
JChannel	A channel represents a group communication endpoint (like a socket).

Classes in org.jgroups used by org.jgroups.protocols

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Membership	Represents a membership of a cluster group.
Message	A Message is used to send data to members of a group.
Message.Flag
NullAddress
PhysicalAddress	Represents a physical (as opposed to logical) address
View	A view is a local representation of the current membership of a group.
ViewId	ViewIds are used for ordering views (each view has a ViewId and a list of members).

Classes in org.jgroups used by org.jgroups.protocols.dns

Class	Description
Address	Address identifies cluster member.
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.

Classes in org.jgroups used by org.jgroups.protocols.pbcast

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
Header	Header is a JGroups internal base class for all JGroups headers.
Lifecycle	Interface that defines lifecycle methods.
Membership	Represents a membership of a cluster group.
Message	A Message is used to send data to members of a group.
View	A view is a local representation of the current membership of a group.
ViewId	ViewIds are used for ordering views (each view has a ViewId and a list of members).

Classes in org.jgroups used by org.jgroups.protocols.relay

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.
PhysicalAddress	Represents a physical (as opposed to logical) address
Receiver	Defines the callbacks that are invoked when messages, views etc are received
View	A view is a local representation of the current membership of a group.

Classes in org.jgroups used by org.jgroups.protocols.relay.config

Class	Description
JChannel	A channel represents a group communication endpoint (like a socket).

Classes in org.jgroups used by org.jgroups.stack

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Event	Event is a JGroups internal class used for inter-stack and intra-stack communication.
JChannel	A channel represents a group communication endpoint (like a socket).
JChannelProbeHandler	An implementation of a DiagnosticsHandler.ProbeHandler for JChannel
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.
PhysicalAddress	Represents a physical (as opposed to logical) address

Classes in org.jgroups used by org.jgroups.util

Class	Description
Address	Address identifies cluster member.
Constructable	Interface returning a supplier which can be called to create an instance
Header	Header is a JGroups internal base class for all JGroups headers.
JChannel	A channel represents a group communication endpoint (like a socket).
Lifecycle	Interface that defines lifecycle methods.
Message	A Message is used to send data to members of a group.
Message.Flag
Message.TransientFlag
PhysicalAddress	Represents a physical (as opposed to logical) address
Receiver	Defines the callbacks that are invoked when messages, views etc are received
View	A view is a local representation of the current membership of a group.
ViewId	ViewIds are used for ordering views (each view has a ViewId and a list of members).